Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

ZKLN3572-2RS-2AP-XL


Axial angular contact ball bearings

matched pair, double direction, lip seals on both sides

  
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsSealed on both sidesLifetime lubrication, freedom from maintenanceGrease lubrication
Design of housing and shaft (threaded spindle)
Design of housing and shaft (threaded spindle)
(4) Only valid in assembled condition
 
d 35  mm  Tolerance: 0/-0,005
D 72  mm  Tolerance: 0/-0,01
B 68  mm  Tolerance: 0/-0,5
  60  °  Contact angle
Da max 62  mm   
d1 52  mm   
da min 45  mm   
r1 min 0,6  mm   
rmin 0,3  mm   
m 1,02  kg  ≈ Mass
Ca 73000  N  Basic dynamic load rating, axial
C0a 177000  N  Basic static load rating, axial
Cua 10800  N  Fatigue limit load, axial
nG Fett 4400  1/min  Limiting speed for grease lubrication
nϑ 2000  1/min  Thermally safe operating speed
MRL 0,9  Nm  Bearing frictional torque
caL 1600  N/µm  Axial rigidity
ckL 900  Nm/mrad  Tilting rigidity
Mm 3,02  kg * cm^2  Mass moment of inertia for rotating inner ring
  2,5  µm  Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
  ZMA35/58  Recommended INA precision locknuts with radial clamping

The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
  AM35/58  Recommended INA precision locknuts with axial clamping

The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA 40  Nm  Tightening torque

Only valid in conjunction with INA precision locknuts.
Observe the guidelines on locating/locating bearing arrangements.
  10770  N  Requisite locknut force, axial

The requisite axial locknut force must be observed when using other locknuts.
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information