Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

ZARF65155-L-TV


Needle roller/axial cylindrical roller bearings

double direction, for screw mounting, long shaft locating washer

  
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsNot sealedGrease lubricationOil lubrication
Hole pattern
(1) Mounting dimension for seal carrier assembly DRS.
Seal carriers: see under "Accessories".
Design of housing
(3) Adjacent construction, bearing screw mounted in bore
Housing design
Design of shaft (threaded spindle)
(4) Only valid in assembled condition
 
d 65  mm   
D 155  mm   
H 103  mm   
  M10  Fixing screws to DIN EN ISO 4762 10.9

Screws not included in scope of delivery.
Tightening torque according to
manufacturer’s data.
B 17,5  mm   
B1 38,5  mm   
B2 18  mm   
C 22,5  mm   
C1 12,5  mm   
D1 110  mm   
D2 90  mm   
D3 108  mm   
Da max 111  mm  Mounting dimensions
If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration.
d1 6  mm   
da min 88  mm  Mounting dimensions
If rotary shaft seals are used, the outside diameter of the sealing ring must be taken into consideration.
H1 72  mm   
J 128  mm   
na x ta 12 x 30  °  Number x pitch Screw mounting holes
n x t 12 x 30  °  Fixing screws to DIN EN ISO 4762 10.9
Number x pitch

Screws not included in scope of delivery.
Tightening torque according to
manufacturer’s data.
r1 min 0,6  mm   
rmin 0,3  mm   
t1 0,2  mm   
m 5,7  kg  Mass
Ca 172000  N  Basic dynamic load rating, axial
C0a 500000  N  Basic static load rating, axial
Cr 54000  N  Basic dynamic load rating, radial
C0r 104000  N  Basic static load rating, radial
Cua 46500  N  Fatigue limit load, axial
Cur 14900  N  Fatigue limit load, radial
nG Öl 2600  1/min  Limiting speed for oil lubrication (valid only with adequate oil cooling)
nG Fett 900  1/min  Limiting speed for grease lubrication
MRL 4  Nm  Bearing frictional torque
caL 4800  N/µm  Axial rigidity
ckL 4000  Nm/mrad  Tilting rigidity
Mm 60,1  kg * cm^2  Mass moment of inertia for rotating inner ring
  1  µm  Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
  ZMA65/105  Recommended INA precision locknuts with radial clamping

The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
  AM65  Recommended INA precision locknuts with axial clamping

The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA 270  Nm  Tightening torque

Only valid in conjunction with INA precision locknuts.
Observe the guidelines on locating/locating bearing arrangements.
  40652  N  Requisite locknut force, axial

The requisite axial locknut force must be observed when using other locknuts.
  90X110X12  Rotary shaft seal to DIN 3760
To be ordered separately.
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information