Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

YRTC650-XL


Axial/radial bearings

Double direction, for screw mounting

  
Have you also thought about mounting? You can find further information here on mounting of the selected types. Alternatively, contact one of our Engineering Offices for further assistance.
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsMoments about all axesNot sealedGrease lubrication
Hole pattern
2 retaining screws (1)
 
d 650  mm  Tolerance: 0/-0,038
D 870  mm  Tolerance: 0/-0,05
H 122  mm   
  46  Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  42  Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  2  Number of retaining screws
  6  Number of extraction threads
a 13  mm  Fixing holes in inner ring
C 34  mm   
D1 max 800  mm  Diameter of inner ring for design of adjacent construction
d1 14  mm  Fixing holes in inner ring
d2 20  mm  Fixing holes in inner ring
d3 14  mm  Fixing holes in outer ring
G M12  Extraction thread
H1 78  mm   
H2 44  mm   
J 680  mm  Fixing holes in inner ring
J1 830  mm  Fixing holes in outer ring
t 48 x 7,5°  Pitch t
Including retaining screws and extraction threads

Quantity X t
m 170  kg  ≈ Mass
MA 116  Nm  Screw tightening torque

Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 910000  N  Basic dynamic load rating, axial
C0a 6800000  N  Basic static load rating, axial
Cr 455000  N  Basic dynamic load rating, radial
C0r 1300000  N  Basic static load rating, radial
Cur 136000  N  Fatigue limit load, radial
Cua 510000  N  Fatigue limit load, axial
nG 70  1/min  Limiting speed
Continuous operation
nG 170  1/min  Limiting speed
Swivel type operation, short operating duration
MR 70  Nm  Bearing frictional torque
caL 20600  N/µm  Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 7300  N/µm  Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 1193000  Nm/mrad  Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 51400  N/µm  Axial rigidity of rolling element set
crL 8200  N/µm  Radial rigidity of rolling element set
ckL 3554000  Nm/mrad  Tilting rigidity of rolling element set
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information