Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

YRTC580-XL


Axial/radial bearings

Double direction, for screw mounting

  
Have you also thought about mounting? You can find further information here on mounting of the selected types. Alternatively, contact one of our Engineering Offices for further assistance.
Send to shopping basket
Radial loadAxial load in one directionAxial load in two directionsMoments about all axesNot sealedGrease lubrication
Hole pattern
2 retaining screws (1)
 
d 580  mm  Tolerance: 0/-0,025
D 750  mm  Tolerance: 0/-0,035
H 90  mm   
  46  Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  42  Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  2  Number of retaining screws
  6  Number of extraction threads
a 11  mm  Fixing holes in inner ring
C 30  mm   
D1 max 700  mm  Diameter of inner ring for design of adjacent construction
d1 11,4  mm  Fixing holes in inner ring
d2 18  mm  Fixing holes in inner ring
d3 11,4  mm  Fixing holes in outer ring
G M12  Extraction thread
H1 60  mm   
H2 30  mm   
J 610  mm  Fixing holes in inner ring
J1 720  mm  Fixing holes in outer ring
t 48 x 7,5°  Pitch t
Including retaining screws and extraction threads

Quantity X t
m 89  kg  ≈ Mass
MA 68  Nm  Screw tightening torque

Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 580000  N  Basic dynamic load rating, axial
C0a 4450000  N  Basic static load rating, axial
Cr 235000  N  Basic dynamic load rating, radial
C0r 730000  N  Basic static load rating, radial
Cur 78000  N  Fatigue limit load, radial
Cua 320000  N  Fatigue limit load, axial
nG 80  1/min  Limiting speed
Continuous operation
nG 200  1/min  Limiting speed
Swivel type operation, short operating duration
MR 60  Nm  Bearing frictional torque
caL 11900  N/µm  Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 2900  N/µm  Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 735000  Nm/mrad  Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 41800  N/µm  Axial rigidity of rolling element set
crL 11200  N/µm  Radial rigidity of rolling element set
ckL 1960000  Nm/mrad  Tilting rigidity of rolling element set
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information