Schaeffler Product catalogue - medias
Ihre Eingaben des Auswahlassistenten werden im Hintergrund gespeichert, Sie können den Assistenten jederzeit wieder aufrufen.
(0)

KWEM09


Carriages

standard carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row

  
Send to shopping basket
Compressive loadTensile loadMoments about all axesSealed on all sidesProtected against rustGrease lubricationOil lubrication
Load directions
 
H 10  mm   
B 20  mm   
L 30  mm   
1)   Locating face
A1 5,5  mm   
A2 2,5  mm   
A3 2,2  mm   
aL max 14,5  mm   
aL min 4,5  mm   
aR max 14,5  mm   
aR min 4,5  mm   
G2 M3  for screws to DIN ISO 4 762-12.9
If there is a possibility of settling, the fixing screws should be secured against rotation.
Max. tightening torque:
M2 = 0,6 Nm
M3 = 2,2 Nm
M4 = 5 Nm
H1 2  mm   
h1 2,5  mm   
JB 15  mm   
JL 10  mm   
jL 20  mm   
K1 M3  for screws to DIN ISO 4 762-12.9
If there is a possibility of settling, the fixing screws should be secured against rotation.
Max. tightening torque:
M2 = 0,6 Nm
M3 = 2,2 Nm
M4 = 5 Nm
L1 20,8  mm   
lmax 860  mm  Maximum length I max of guideways; longer guideways by agreement

Available standard lengths:
60 mm: 0,02 kg
80 mm: 0,028 kg
120 mm: 0,042 kg
160 mm: 0,056 kg
220 mm: 0,078 kg
280 mm: 0,098 kg
860 mm: 0,30 kg
T5 3  mm   
mW 0,019  kg  Mass of carriage
mS 0,3  kg/m  Mass of guideway
CI 1430  N  Load direction I: compressive load
C0 I 2760  N  Load direction I: compressive load
CII 1430  N  Load direction II: tensile load
C0 II 2760  N  Load direction II: tensile load
CIII 1258  N  Load direction III: lateral load
C0 III 2318  N  Load direction III: lateral load
M0x 12,8  Nm  Moment rating
M0y 7,6  Nm  Moment rating
M0z 9,1  Nm  Moment rating
Schaeffler applies cookies to secure an optimal use. With the further use of this website you accept the application of cookies.  Further information